BQLLW - SOLDER ALLOYS CONTAINING LEAD
- MSDS: BQLLW
- Manufacturer: KESTER SOLDER
- Product Name: SOLDER ALLOYS CONTAINING LEAD
- National Stock Number: 3439-00N035907
Product Identification
Product ID:SOLDER ALLOYS CONTAINING LEAD
MSDS Date:06/01/1992
FSC:3439
NIIN:00N035907
MSDS Number: BQLLW
Responsible Party
DES PLAINES, IL 60018
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 708-297-1800
Preparer: D. BERNIER
Cage: GO345
Contractor
Telephone: 847-297-1600
Cage: 75297
Ingredients
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
OSHA PEL 0.05 MG/M3
ACGIH TLV: 0.15 MG/M3 DUST/FUME
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
TIN
CAS: 7440-31-5
RTECS: XP7320000
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3
SILVER (SARA III)
CAS: 7440-22-4
RTECS: VW3500000
OSHA PEL 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
BISMUTH
CAS: 7440-69-9
RTECS: EB2600000
ANTIMONY (SARA III) (PEL/TLV AS SB)
CAS: 7440-36-0
RTECS: CC4025000
OSHA PEL 0.5 MG/M3
ACGIH TLV: 0.5 MG/M3
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
OSHA PEL 0.1MG/M3 FUME;1 DUST
ACGIH TLV: 0.2MG/M3 FUME;1 DUST
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
INDIUM
CAS: 7440-74-6
RTECS: NL1050000
OSHA PEL 0.1 MG/M3
ACGIH TLV: 0.1 MG/M3
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:TARGET ORGANS:INGEST OF LEAD METAL CAN
AFFECT KIDNEYS, GI, REPRO & NEUROLOGICAL SYS. ACUTE: INHAL:OVEREXP
TO LEAD MAY LEAD TO CNS DISORDERS CHARACT BY DROW, SEIZURES, COMA &
DEATH.EXPOS OF THIS MAGNIT UDE ARE UNLIKELY. SKIN/EYE: NONE.
INGEST: NOT LIKELY TO OCCUR, BUT WOULD HAVE SIMILAR EFTS AS INHAL.
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:LEAD AND LEAD COMPOUNDS (INORGANIC):
GROUP 2B (IARC).
Effects of Overexposure:HLTH HAZ: CHRONIC: REPEATED INHALATION OR
INGESTION OF LEAD CAN RESULT IN SYSTEMIC POISONING. NOTE: LEAD CAS#
7439-92-1 APPEARS ON NAVY LISTING OF OCCUP REPRO HAZARDS. SEEK
CONSULTATION FROM APPROP HL TH PROFESSIONALS CONCERNING LATEST
HAZARD LIST INFORMATION AND SAFE HANDLING AND EXPOSURE
RECOMMENDATIONS .
Medical Cond Aggravated by Exposure:PREEXISTING CONDITIONS OR DISEASES
OF THE BLOOD AND BLOOD-FORMING ORGANS, KIDNEYS, NERVES, AND
POSSIBLY REPRODUCTIVE SYSTEM.
First Aid
First Aid:SEEK MEDICAL ASSISTANCE FOR FURTHER TREATMENT, OBSERVATION
AND SUPPORT IF NEEDED. EYE: FOR BURNS FLUSH IMMEDIATELY WITH COOL
WATER FOR AT LEAST 15 MINUTES. SKIN: FOR BURNS FLUSH IMMEDIATELY
WITH COOL WATER. INHAL: REMOVE PERSON FROM EXPOSURE TO FUMES.
INGEST: IF THOUGHT TO BE OVEREXPOSED, THE PERSON SHOULD HAVE A
BLOOD LEAD ANALYSIS DONE.
Fire Fighting
Flash Point Method:TOC
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . MELTED SOLDER > 1000F WILL LIBERATE HIGHLY
TOXIC LEAD &/ANTIMONY FUMES.
Unusual Fire/Explosion Hazard:FLUX IN CORED SOLDER MAY IGNITE WHEN THE
SOLDER MELTS IN FIRE.
Accidental Release
Spill Release Procedures:MELTED SOLDER WILL SOLIDIFY ON COOLING AND CAN
BE SCRAPED UP. USE CAUTION TO AVOID BREATHING FUMES IF A GAS TORCH
IS USED TO CUT UP LARGE PIECES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE AWAY FROM SOURCES OF SULFUR.
CAUTION: EMPTY CONTAINERS MAY CONTAIN PRODUCT RESIDUE. OBSERVE ALL
LABEL PRECAUTIONS.
Other Precautions:AVOID BREATHING FUMES DURING SOLDERING. DO NOT PLACE
FLUX CORED SOLDER INTO A HOT POT BECAUSE THE FLUX MAY IGNIT. USE OF
STRONG ACID FLUXES MAY RESULT IN LIBERATION OF TOXIC LEAD CHLORIDE
FUMES.
Exposure Controls
Respiratory Protection:USUALLY NOT REQUIRED. WHEN VENTILATION IS NOT
SUFFICIENT TO REMOVE FUMES FROM THE BREATHING ZONE, A NIOSH/MSHA
APPROVED CARTRIDGE TYPE RESPIRATOR SHOULD BE WORN.
Ventilation:PROVIDE ADEQUATE EXHAUST VENTILATION (GENERAL AND/OR LOCAL)
TO MEET TLV REQUIREMENTS.
Protective Gloves:NOT USUALLY REQD. IMPERV GLOVES .
Eye Protection:CHEM WORK GOG/FULL LGTH FSHLD .
Other Protective Equipment:NONE
Work Hygienic Practices:WASH HANDS AFTER HANDLING SOLDER CONTAINING
LEAD BEFORE EATING OR SMOKING.
Supplemental Safety and Health
SPEC GRAV: >1 @ 24C (H*2O=1).
Chemical Properties
HCC:N1
Spec Gravity:SUPP DATA
Solubility in Water:0%
Appearance and Odor:SILVER-GRAY METAL IN BAR, WIRE, RIBBON, OR
PREFORMED SHAPES.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACID, STRONG OXIDIZERS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NO LEAD OR ANTIMONY ARE DETECTED IN
FUMES FROM SOLDERING BELOW 1000F (537C).
Disposal
Waste Disposal Methods:SOLDER CAN BE RECLAIMED. DISPOSE OF I/A/W
FEDERAL, STATE AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.